Conveyor Belts
Conveyor Rollers
V Belts
Transmission Belts
Timing Belts
Industrial Belts
Toothed Belts
Modular Belting
Car Belts
Contact Us
  • A&S Conveyor Belts Co., Ltd.
  • Address:No. 469, Xingsheng Road, Gaoxin District, Chengdu, China
  • Tel:+86-28-66960589
  • Fax:+86-28-86129221
  • Email:
    belts@attachment8.com
  • Contact Person:Sandra
Home / Products / Conveyor Belts / Savatech Conveyor Belts / CLEAT and PROFILES for Conveyor Belts / V Guide Strips / Savatech CLEAT and PROFILES for Conveyor Belts V Guide Strips K 16

Savatech CLEAT and PROFILES for Conveyor Belts V Guide Strips K 16

Savatech CLEAT and PROFILES for Conveyor Belts V Guide Strips K 16
share

Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.

Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 MOR
Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 MOR
For technical reasons, a rotating supporting roller cannot be installed in certain types of conveyors, therefore, a belt requires a so-called sliding table to operate. Such operation does not allow the bottom surface of the belt to be coated with rubber, as this would increase friction between the b
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats  TB 110
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats TB 110
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts SELF -EXTINGUISHING (fire and flame resistant) Conveyor Belts S
Savatech Conveyor Belts SELF -EXTINGUISHING (fire and flame resistant) Conveyor Belts S
At conveying of bulk solids difficulties can sometimes arise such as self-ignition of either the conveyed goods or the conveyor belt itself. Therefore SAVA experts have developed special types of self-extinguishing rubber to raise safety to the highest degree.With regard to the application there are
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts SMOR
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts SMOR
As a rule, oils and greases have a very destructive impact on rubber, however, materials that contain oil or grease are daily conveyed. In order to protect rubber components in the conveyor belts from swelling, types of rubber that are resistant to oil and grease should be applied. Since not all oil
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 90
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 90
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 110
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 110
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts ELEVATOR Conveyor Belts EP 500/3 1/1 Y cut edge
Savatech Conveyor Belts ELEVATOR Conveyor Belts EP 500/3 1/1 Y cut edge
ELEVATOR conveyor belts are designed for application in all areas of the belted - type elevators. Due to their carcass construction they are known as an "endurance runner" and have proven to be reliable conveyor belts with a long service life. ELEVATOR conveyor belts are the best solution from the t
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 35
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 35
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts MG
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts MG
As a rule, oils and greases have a very destructive impact on rubber, however, materials that contain oil or grease are daily conveyed. In order to protect rubber components in the conveyor belts from swelling, types of rubber that are resistant to oil and grease should be applied. Since not all oil
Savatech Conveyor Belts RIPCHECK Conveyor Belts EP 500/3 + 1RC 10/3 Y
Savatech Conveyor Belts RIPCHECK Conveyor Belts EP 500/3 + 1RC 10/3 Y
Conveying bulk solids can sometimes cause difficulties; sharp-edged, large pieces of undefined shapes, unfavourable feeding conditions, material pile-ups could result in longitudinal cuts or punctures in the belt. SAVA engineers have identified the problem and searched for a technical and cost-effic