Conveyor Belts
Conveyor Rollers
V Belts
Transmission Belts
Timing Belts
Industrial Belts
Toothed Belts
Modular Belting
Car Belts
Contact Us
  • A&S Conveyor Belts Co., Ltd.
  • Address:No. 469, Xingsheng Road, Gaoxin District, Chengdu, China
  • Tel:+86-28-66960589
  • Fax:+86-28-86129221
  • Email:
    belts@attachment8.com
  • Contact Person:Sandra
Home / Products / Conveyor Belts / Savatech Conveyor Belts / CLEAT and PROFILES for Conveyor Belts / Standard T Cleats / Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 25

Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 25

Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 25
share

Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.

Savatech Conveyor Belts SLIDING Conveyor Belts EP 250/2 2/0 Y
Savatech Conveyor Belts SLIDING Conveyor Belts EP 250/2 2/0 Y
For technical reasons, a rotating supporting roller cannot be installed in certain types of conveyors, therefore, a belt requires a so-called sliding table to operate. Such operation does not allow the bottom surface of the belt to be coated with rubber, as this would increase friction between the b
Savatech Conveyor Belts  TECHNICAL Rubber Sheets C
Savatech Conveyor Belts TECHNICAL Rubber Sheets C
Sava produces a wide range of technical rubber sheets which are available in different types, dimension and hardness.both sides smoothone or both sides with textile pattern (fabric impression or fine grip)without plies - width from 1000 mm to 1600 mmwith plies - width 1300 mm (cotton ply) or to 1600
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 55
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 55
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts ELEVATOR Conveyor Belts EP 1000/5 2/2 Y cut edge
Savatech Conveyor Belts ELEVATOR Conveyor Belts EP 1000/5 2/2 Y cut edge
ELEVATOR conveyor belts are designed for application in all areas of the belted - type elevators. Due to their carcass construction they are known as an "endurance runner" and have proven to be reliable conveyor belts with a long service life. ELEVATOR conveyor belts are the best solution from the t
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 110
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 110
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 75
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 75
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts GMG
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts GMG
As a rule, oils and greases have a very destructive impact on rubber, however, materials that contain oil or grease are daily conveyed. In order to protect rubber components in the conveyor belts from swelling, types of rubber that are resistant to oil and grease should be applied. Since not all oil
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts SMOR
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts SMOR
As a rule, oils and greases have a very destructive impact on rubber, however, materials that contain oil or grease are daily conveyed. In order to protect rubber components in the conveyor belts from swelling, types of rubber that are resistant to oil and grease should be applied. Since not all oil
Savatech Conveyor Belts RIPCHECK Conveyor Belts EP 500/3 + 1RC 10/3 Y
Savatech Conveyor Belts RIPCHECK Conveyor Belts EP 500/3 + 1RC 10/3 Y
Conveying bulk solids can sometimes cause difficulties; sharp-edged, large pieces of undefined shapes, unfavourable feeding conditions, material pile-ups could result in longitudinal cuts or punctures in the belt. SAVA engineers have identified the problem and searched for a technical and cost-effic
Savatech Conveyor Belts SUPERGRIP,FEINGRIP and NOPPEN Conveyor Belts EP 400/3 SG/0
Savatech Conveyor Belts SUPERGRIP,FEINGRIP and NOPPEN Conveyor Belts EP 400/3 SG/0
When conveying material in horizontal and especially ascending direction, the material could slip off the smooth conveyor belt. We have found a solution to this problem. A special rubber coating with a high friction ability and a special surface design both prevent the material from slipping off the