Conveyor Belts
Conveyor Rollers
V Belts
Transmission Belts
Timing Belts
Industrial Belts
Toothed Belts
Modular Belting
Car Belts
Contact Us
  • A&S Conveyor Belts Co., Ltd.
  • Address:No. 469, Xingsheng Road, Gaoxin District, Chengdu, China
  • Tel:+86-28-66960589
  • Fax:+86-28-86129221
  • Email:
    belts@attachment8.com
  • Contact Person:Sandra
Home / Products / Conveyor Belts / Savatech Conveyor Belts / CLEAT and PROFILES for Conveyor Belts / Inclined C Cleats / Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 90

Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 90

Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 90
share

Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.

Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts MOR
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts MOR
As a rule, oils and greases have a very destructive impact on rubber, however, materials that contain oil or grease are daily conveyed. In order to protect rubber components in the conveyor belts from swelling, types of rubber that are resistant to oil and grease should be applied. Since not all oil
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts KMOR
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts KMOR
As a rule, oils and greases have a very destructive impact on rubber, however, materials that contain oil or grease are daily conveyed. In order to protect rubber components in the conveyor belts from swelling, types of rubber that are resistant to oil and grease should be applied. Since not all oil
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 35 2
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 35 2
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 110
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 110
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 Y
Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 Y
For technical reasons, a rotating supporting roller cannot be installed in certain types of conveyors, therefore, a belt requires a so-called sliding table to operate. Such operation does not allow the bottom surface of the belt to be coated with rubber, as this would increase friction between the b
Savatech Conveyor Belts  TECHNICAL Rubber Sheets E
Savatech Conveyor Belts TECHNICAL Rubber Sheets E
Sava produces a wide range of technical rubber sheets which are available in different types, dimension and hardness.both sides smoothone or both sides with textile pattern (fabric impression or fine grip)without plies - width from 1000 mm to 1600 mmwith plies - width 1300 mm (cotton ply) or to 1600
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats TB 50
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats TB 50
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts Multi-ply Conveyor Belts
Savatech Conveyor Belts Multi-ply Conveyor Belts
Document The design of multi-ply conveyor belts enables application in all areas of materials handling. Due to the carcass construction and quality of cover these belts are noted for their reliability and long life in all industrial applications either for gener
Savatech Conveyor Belts SUPERGRIP,FEINGRIP and NOPPEN Conveyor Belts EP 400/3 SG/0
Savatech Conveyor Belts SUPERGRIP,FEINGRIP and NOPPEN Conveyor Belts EP 400/3 SG/0
When conveying material in horizontal and especially ascending direction, the material could slip off the smooth conveyor belt. We have found a solution to this problem. A special rubber coating with a high friction ability and a special surface design both prevent the material from slipping off the
Savatech CLEAT and PROFILES for Conveyor Belts Angled TC Cleats TC 110
Savatech CLEAT and PROFILES for Conveyor Belts Angled TC Cleats TC 110
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.