Conveyor Belts
Conveyor Rollers
V Belts
Transmission Belts
Timing Belts
Industrial Belts
Toothed Belts
Modular Belting
Car Belts
Contact Us
  • A&S Conveyor Belts Co., Ltd.
  • Address:No. 469, Xingsheng Road, Gaoxin District, Chengdu, China
  • Tel:+86-28-66960589
  • Fax:+86-28-86129221
  • Email:
    belts@attachment8.com
  • Contact Person:Sandra
Home / Products / Conveyor Belts / Savatech Conveyor Belts / CLEAT and PROFILES for Conveyor Belts / Inclined C Cleats / Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 110

Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 110

Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 110
share

Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.

Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 MOR
Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 MOR
For technical reasons, a rotating supporting roller cannot be installed in certain types of conveyors, therefore, a belt requires a so-called sliding table to operate. Such operation does not allow the bottom surface of the belt to be coated with rubber, as this would increase friction between the b
Savatech CLEAT and PROFILES for Conveyor Belts V Guide Strips K 23
Savatech CLEAT and PROFILES for Conveyor Belts V Guide Strips K 23
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts MG PLUS
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts MG PLUS
As a rule, oils and greases have a very destructive impact on rubber, however, materials that contain oil or grease are daily conveyed. In order to protect rubber components in the conveyor belts from swelling, types of rubber that are resistant to oil and grease should be applied. Since not all oil
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats  TB 40/2
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats TB 40/2
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts CHEVRON Conveyor Belts
Savatech Conveyor Belts CHEVRON Conveyor Belts
Conveyor belts with a smooth carrying surface are useful for conveying of packed and unpacked material up to the angle of inclination 22° as an upper limit.CHEVRON belts are the right belts to meet your requirements when higher angles of inclination are required.For this purpose, SAVA has developed
Savatech Conveyor Belts SLIDING Conveyor Belts EP 250/2 2/0 Y
Savatech Conveyor Belts SLIDING Conveyor Belts EP 250/2 2/0 Y
For technical reasons, a rotating supporting roller cannot be installed in certain types of conveyors, therefore, a belt requires a so-called sliding table to operate. Such operation does not allow the bottom surface of the belt to be coated with rubber, as this would increase friction between the b
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 110
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 110
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 60
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 60
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats  TB 40/1
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats TB 40/1
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts MG
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts MG
As a rule, oils and greases have a very destructive impact on rubber, however, materials that contain oil or grease are daily conveyed. In order to protect rubber components in the conveyor belts from swelling, types of rubber that are resistant to oil and grease should be applied. Since not all oil