Conveyor Belts
Conveyor Rollers
V Belts
Transmission Belts
Timing Belts
Industrial Belts
Toothed Belts
Modular Belting
Car Belts
Contact Us
  • A&S Conveyor Belts Co., Ltd.
  • Address:No. 469, Xingsheng Road, Gaoxin District, Chengdu, China
  • Tel:+86-28-66960589
  • Fax:+86-28-86129221
  • Email:
    belts@attachment8.com
  • Contact Person:Sandra
Home / Products / Conveyor Belts / Savatech Conveyor Belts / CLEAT and PROFILES for Conveyor Belts / Angled TC Cleats / Savatech CLEAT and PROFILES for Conveyor Belts Angled TC Cleats TC 90

Savatech CLEAT and PROFILES for Conveyor Belts Angled TC Cleats TC 90

Savatech CLEAT and PROFILES for Conveyor Belts Angled TC Cleats TC 90
share

Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.

Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats TB 50
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats TB 50
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 Y
Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 Y
For technical reasons, a rotating supporting roller cannot be installed in certain types of conveyors, therefore, a belt requires a so-called sliding table to operate. Such operation does not allow the bottom surface of the belt to be coated with rubber, as this would increase friction between the b
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats TB 20
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats TB 20
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats  TB 30
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats TB 30
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts  TECHNICAL Rubber Sheets B
Savatech Conveyor Belts TECHNICAL Rubber Sheets B
Sava produces a wide range of technical rubber sheets which are available in different types, dimension and hardness.both sides smoothone or both sides with textile pattern (fabric impression or fine grip)without plies - width from 1000 mm to 1600 mmwith plies - width 1300 mm (cotton ply) or to 1600
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 110
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 110
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts GMG
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts GMG
As a rule, oils and greases have a very destructive impact on rubber, however, materials that contain oil or grease are daily conveyed. In order to protect rubber components in the conveyor belts from swelling, types of rubber that are resistant to oil and grease should be applied. Since not all oil
Savatech CLEAT and PROFILES for Conveyor Belts Angled TC Cleats TC 75
Savatech CLEAT and PROFILES for Conveyor Belts Angled TC Cleats TC 75
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts MG
Savatech Conveyor Belts OIL and GREASE RESISTANT Conveyor Belts MG
As a rule, oils and greases have a very destructive impact on rubber, however, materials that contain oil or grease are daily conveyed. In order to protect rubber components in the conveyor belts from swelling, types of rubber that are resistant to oil and grease should be applied. Since not all oil
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats  TB 40/1
Savatech CLEAT and PROFILES for Conveyor Belts Block T Cleats TB 40/1
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.