Conveyor Belts
Conveyor Rollers
V Belts
Transmission Belts
Timing Belts
Industrial Belts
Toothed Belts
Modular Belting
Car Belts
Contact Us
  • A&S Conveyor Belts Co., Ltd.
  • Address:No. 469, Xingsheng Road, Gaoxin District, Chengdu, China
  • Tel:+86-28-66960589
  • Fax:+86-28-86129221
  • Email:
    belts@attachment8.com
  • Contact Person:Sandra
Home / Products / Conveyor Belts / Savatech Conveyor Belts / CLEAT and PROFILES for Conveyor Belts / Angled TC Cleats / Savatech CLEAT and PROFILES for Conveyor Belts Angled TC Cleats TC 75

Savatech CLEAT and PROFILES for Conveyor Belts Angled TC Cleats TC 75

Savatech CLEAT and PROFILES for Conveyor Belts Angled TC Cleats TC 75
share

Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.

Savatech Conveyor Belts PIPETYPE Conveyor Belts
Savatech Conveyor Belts PIPETYPE Conveyor Belts
In cooperation with the operators of conveyors produced by various well-known manufacturers, our engineers have developed a PIPETYPE conveyor belt. The Pipetype is suitable for use in tougher conditions and requires application of special tubular-type conveyors. Due to its special carcass constructi
Savatech Conveyor Belts  TECHNICAL Rubber Sheets E
Savatech Conveyor Belts TECHNICAL Rubber Sheets E
Sava produces a wide range of technical rubber sheets which are available in different types, dimension and hardness.both sides smoothone or both sides with textile pattern (fabric impression or fine grip)without plies - width from 1000 mm to 1600 mmwith plies - width 1300 mm (cotton ply) or to 1600
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 110
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 110
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 35 2
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 35 2
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts ELEVATOR Conveyor Belts EP 500/3 1/1 Y cut edge
Savatech Conveyor Belts ELEVATOR Conveyor Belts EP 500/3 1/1 Y cut edge
ELEVATOR conveyor belts are designed for application in all areas of the belted - type elevators. Due to their carcass construction they are known as an "endurance runner" and have proven to be reliable conveyor belts with a long service life. ELEVATOR conveyor belts are the best solution from the t
Savatech Conveyor Belts  TECHNICAL Rubber Sheets B
Savatech Conveyor Belts TECHNICAL Rubber Sheets B
Sava produces a wide range of technical rubber sheets which are available in different types, dimension and hardness.both sides smoothone or both sides with textile pattern (fabric impression or fine grip)without plies - width from 1000 mm to 1600 mmwith plies - width 1300 mm (cotton ply) or to 1600
Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 MOR
Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 MOR
For technical reasons, a rotating supporting roller cannot be installed in certain types of conveyors, therefore, a belt requires a so-called sliding table to operate. Such operation does not allow the bottom surface of the belt to be coated with rubber, as this would increase friction between the b
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 90
Savatech CLEAT and PROFILES for Conveyor Belts Inclined C Cleats C 90
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.
Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 Y
Savatech Conveyor Belts SLIDING Conveyor Belts EP 400/3 2/0 Y
For technical reasons, a rotating supporting roller cannot be installed in certain types of conveyors, therefore, a belt requires a so-called sliding table to operate. Such operation does not allow the bottom surface of the belt to be coated with rubber, as this would increase friction between the b
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 55
Savatech CLEAT and PROFILES for Conveyor Belts Standard T Cleats T 55
Cleats and profiles for conveyor belts are mainly produced from two materials - SBR and NBR, the technical properties of which are outlined in the table below. As we have our own production of rubber materials, special compounds can be developed for customers with specific requirements.