Conveyor Belts
Conveyor Rollers
V Belts
Transmission Belts
Timing Belts
Industrial Belts
Toothed Belts
Modular Belting
Car Belts
Contact Us
  • A&S Conveyor Belts Co., Ltd.
  • Address:No. 469, Xingsheng Road, Gaoxin District, Chengdu, China
  • Tel:+86-28-66960589
  • Fax:+86-28-86129221
  • Email:
    belts@attachment8.com
  • Contact Person:Sandra
Home / Products / Conveyor Rollers / Interroll Conveyor Rollers / Accessories for Conveyor Lines / Interroll Accessories for Conveyor Lines Profile Connectors

Interroll Accessories for Conveyor Lines Profile Connectors

Interroll Accessories for Conveyor Lines Profile Connectors
share

Product Description
Profile connectors connect the side profiles of two conveyors in one line. Their special form guarantees alignment of the side profiles. Four profile connectors are normally required to connect two conveyor modules together.

Technical Data
Description
Dimensions (mm)

Profile Connectors
80 x 20

Interroll Conveyor Rollers for Medium Duty Steel Conveyor Roller Series 1200
Interroll Conveyor Rollers for Medium Duty Steel Conveyor Roller Series 1200
Product Description Full steel heavy duty roller design. Roller for driven and non-driven application. Roller for low (-28°C) and high (+80°C) temperatures. Swaged tube ends for easy 90° box transfer. Technical Data Tube diameter: 30 and 50 mm Tube material: Zinc-plated steel Max. load: 1200 N Ma
Interroll Roller Conveyors Intelliveyor Transfer RM 5591
Interroll Roller Conveyors Intelliveyor Transfer RM 5591
Product Description The Intelliveyor Transfer 90° transfers material from a straight section in a perpendicular direction and can be used both for merging and diverting. The electrical stroke of the transfer belt guarantees safe transportation. Technical Data
Interroll Roller Conveyors Driveshaft Roller Conveyor RM 5622
Interroll Roller Conveyors Driveshaft Roller Conveyor RM 5622
Product Description The Driveshaft Merge Roller Conveyor merges two conveyor lines together. The rollers are driven from a horizontal shaft. Technical Data General technical data Max. l
Interroll Conveyor Rollers for Medium Duty Tapered Fixed Drive Conveyor Roller Series 3500KXO
Interroll Conveyor Rollers for Medium Duty Tapered Fixed Drive Conveyor Roller Series 3500KXO
Product Description Roller Series 3500 with pressed on Polypropylene taper segments. Taper segments secured against axial movement. Larger end closed by cap. Roller for driven roller curves. Impact resistant and abrasion-proven taper material.Available drive sprockets:€¢PolyVee€¢PolyO (two rou
Interroll Idler Pulley with integral bearings
Interroll Idler Pulley with integral bearings
Product Description Characteristics€¢Static shaft €¢Precision-machined shell €¢Integral bearings€¢Dimensions match drum motors Technical Data Protection rate: IP66 (IP69k for D-series) Max. belt tension: See equivalent drum motor Max. belt speed: See equivalent drum motor Internal shaft
Interroll Key Elements Lift RM 6006
Interroll Key Elements Lift RM 6006
Product Description The lifting station consists of a column construction and a carriage upon which a roller conveyor is mounted. A worm gear motor with brake is used as drive unit to raise and lower the carriage via a belt.Technical Data General technical data Max. load capacity 200kg Stroke velo
Interroll Roller Conveyors Driveshaft Roller Conveyor RM 5621
Interroll Roller Conveyors Driveshaft Roller Conveyor RM 5621
Product Description The roller conveyor curves change the direction of transport of material. The alignment of the material is maintained within the side frames by tapered rollers. The rollers are driven from a horizontal shaft. Technical Data Gene
Interroll Key Elements Single Blade Stop RM 5770
Interroll Key Elements Single Blade Stop RM 5770
Product Description The Single Blade Stop RM 5770 is a pneumatically actuated stop that is raised between the roller pitches in order to stop or accumulate material. Stops are often used in conjunction with conveying components such as transfers and pushers for aligning products or policing processe
Interroll Accessories for Conveyor Lines Round Half Nuts
Interroll Accessories for Conveyor Lines Round Half Nuts
Product Description Round half nuts are required for mounting of all components to the Interroll standard profile. They can be inserted at any time into the T-slot of the side profiles.Technical Data Description Dimensions (mm) Round half nut M8 25 x 20 x 10 Round half nut M6 25 x 20 x 10
Interroll Key Elements Belt Transfer RM 5710
Interroll Key Elements Belt Transfer RM 5710
Product Description A toothed belt transfer modifies the direction of transport by 90°. Pneumatically raised toothed belts mounted between the conveyor rollers transport material into the adjacent conveyor line or else remove it from the conveyor line.Technical Data General technical data Max. lo