Dunlop Conveyor Belts Textile Belting Profiled Belts High Chevron S 400 3 HC 600 32

Chevron belting is used to convey materials at angles that are so steep that load slips or falls back. The special profiles on such belts make increased angles of inclination possible compared with smooth surface belts.

Low chevron:
400 - 500 - 600 - 650 - 800 - 1000 - 1200 mm wide

High Chevron:
500-600-650-800-1000-1200-1400-1600 mm wide

Application Area
Indications for the slope angle:
Approx. 30° for slightly rolling materials, such - as gravel, coal etc.
Approx. 40° for sticky materials, such as wet sand, earth etc.
Approx. 25° up to 35° for packages, such as sacks, bales (paper hessian) etc.

Cover Quality
Abrasion resistant qualities: RA
Heat resistant qualities: Betahete
Oil and grease resistant quality: ROS
Other qualities available on request Carcass construction
Plies of Polyester-Nylon (EP) fabric, strong, low elongation, impervious to moisture.
Belt width availability
Chevron belts are available in standard widths from 400 mm up to 1600 mm, depending on profile.

Belt edges
Chevron and High Chevron belts

Dunlop Conveyor Belts Textile Belting Transverse Rigid Belting Rigitra® 800/5
The Rigitra® belt has been designed to have high transverse rigidity. This enables the belt to work to maximum efficiency when fitted with sidewalls, which is usually in combination with cleats.Application areasFor installations on which conveyor belts with sidewallsand cleats are used.Carcass c

Dunlop Conveyor Belts Special Products Sheeting
Dunlop Arkeen® the cost-effective solution to a wide range of demands.The many key benefits of Arkeen® wear resistant sheeting include:€¢ Reduced wear and minimal cleaning€¢ Reduces noise and dust emissions as well as material build-up, creating a healthier and safer working environmen

Dunlop Conveyor Belts Textile Belting Multi-ply Belts Superfort S 12505
Superfort applicable to all types of industry, especially in areas where aggregate or bulk materials are carried, from light duty to the heaviest of service conditions. Superfort conveyor belts are supplied with 2 to15 plies. This makes it possible to pro application. Available in all Dunlop co

Dunlop Conveyor Belts Textile Belting Sawmill Belts S 400/3 0 + 0mm Saw Mill
Dunlop saw mill conveyor belts have been especially developed for use within the timber industry. Applications include the conveying of tree trunks, planks, bark etc. The rubber used on these belts is non-staining and has been designed to provide first-class resistance to oil and resins. Carcass

Dunlop Conveyor Belts Textile Belting Steel Reinforced Ferroflex F 1600 IW
Steel reinforced conveyor belt: Ferroflex Application Area Ferroflex is especially suited to applications where low elongation, cut and tear resistance are needed. Product properties Tensile strengths varying between 500 and 2000 N/mm High quality cover compounds for -60 °C up to +200°C fir

Dunlop Conveyor Belts Textile Belting Multi-ply Belts Trioflex T 800
Trioflex for medium up to the heaviest service conditions, adverse loading conditions or coarse materials. Widely used in the steel industry, blast furnaces, mining and coke industry, ore transport, stone industry and processing industries. The Trioflex conveyor belt has been designed in accordanc

Dunlop Conveyor Belts Textile Belting Steel Reinforced Ferroflex F 2000 SW
Steel reinforced conveyor belt: Ferroflex Application Area Ferroflex is especially suited to applications where low elongation, cut and tear resistance are needed. Product properties Tensile strengths varying between 500 and 2000 N/mm High quality cover compounds for -60 °C up to +200°C fir

Dunlop Conveyor Belts Textile Belting Sawmill Belts S 400/3 1.5 + 0mm Saw Mill
Dunlop saw mill conveyor belts have been especially developed for use within the timber industry. Applications include the conveying of tree trunks, planks, bark etc. The rubber used on these belts is non-staining and has been designed to provide first-class resistance to oil and resins. Carcass

Dunlop Conveyor Belts Textile Belting Slider Belts GB 250 2
Application area Slider belting is used on those installations, where the idlers in the top part have been replaced by slider plates of wood, metal or plastic. On these installations individual items and packages such as parcel post, letters, luggage, boxes, sacks etc. are conveyed. A special rubbe

Dunlop Conveyor Belts Textile Belting Profiled Belts High Chevron S 500 4 HC 1200 32
Chevron belting is used to convey materials at angles that are so steep that load slips or falls back. The special profiles on such belts make increased angles of inclination possible compared with smooth surface belts. Low chevron: 400 - 500 - 600 - 650 - 800 - 1000 - 1200 mm wide High Chevr